Please enter some search terms and try again.

WAFER-ULT-i1 Haswell - 3.5" Embedded 4th Gen Intel® Core™ i7/i5/i3 QM87 Mobile Miniboard

Product image
Datasheet

Features
1. 3.5” form fator with Intel® 4th generation ULT SoC supports dual-channel DDR3L DIMMs
2. 12V only single voltage design with AT/ATX mode support
3. 18/24-bit dual-channel LVDS support
4. Supports triple independent display via with LVDS, VGA and iDP
5. Supports PCIe Mini card slot for mSATA, 3G card, wireless card and DOM

 

Specifications
CPU Intel® 4th generation mobile ULT on-board SoC
Intel® Core™ i7-4650U (1.7GHz, dual-core, 4MB cache, TDP=15W)
Intel® Core™ i5-4300U (1.9GHz, dual-core, 3MB cache, TDP=15W)
Intel® Core™ i3-4010U (1.7GHz, dual-core, 3MB cache, TDP=15W)
Intel® Celeron® processor 2980U (1.6GHz, dual-core, 2MB cache, TDP=15W)
BIOS UEFI BIOS
System Memory Two 204-pin 1600/1333MHz dual-channel DDR3L SDRAM unbuffered DIMMs support up to 16GB
Ethernet GbE1: Intel® I218LM PHY with Intel® AMT 9.0 support
GbE2: Intel® I210-AT PCIe controller with NCSI support
I/O Interface 1 x 6-pin wafer for PS/2 KB/MS 
1 x RS-422/485 
3 x RS-232 
2 x SATA 6Gb/s with 5V power connector
2 x USB 2.0 (by pin header) 
2 x USB 3.0 (on rear I/O)
Digital I/O 8-bit digital I/O (4-bit input / 4-bit output)
Super I/O Fintek F81866
Audio Realtek ALC662 HD Audio codec
Display Interfaces VGA (up to 1920x1200@60Hz)
18/24-bit dual-channel LVDS by CH7511B DP to LVDS converter (up to 1920x1200@60Hz)
iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 3840x2160 @60 Hz)
Expansion 1 x Full-size PCIe Mini card slot (mSATA support)
Watchdog Timer Software programmable, support 1~255 sec. system reset
Power Supply 12V only DC input
1 x Internal 4-pin (2x2) power connector
Support AT/ATX mode
Power Consumption +12V@2.72A (Intel® Core™ i5-4300U CPU, 2 x 8GB 1600 MHz DDR3 memory)
Graphic Intel® HD Graphics Gen 7.5 supports DX11.1, OpenGL 4.2 and OpenCL1.2
Full MPEG2, VC1, AVC decode
Operating Temperature -10°C ~ 60°C
Storage Temperature -20°C ~ 85°C
Humidity 5%~95%, non-condensing
Dimensions 146mm x 102mm
Weight GW:600g/ NW:250g
Front Panel 1 x 6-pin (1x6) wafer for power LED & HDD LED
1 x 2-pin (1x2) wafer for power button
1 x 2-pin (1x2) wafer for power reset button
Fan Connector 1 x 4-pin system fan connector
iRIS Remote Management Module 1 x iRIS-1010 slot
LAN LED 2 x 2-pin headers for LAN1 Link LED, LAN2 Link LED

 

Ordering Information
   
Part No. Description
WAFER-ULT-i1-i7-R10 3.5" SBC supports Intel® 22nm 4th Generation Mobile Core™ i7-4650U processor (ULT), VGA/LVDS/iDP, Dual GbE, USB 3.0, PCIe Mini, SATA 6GB/s Audio, iRIS-1010 and RoHS
WAFER-ULT-i1-i5-R10 3.5" SBC supports Intel® 22nm 4th Generation Mobile Core™ i5-4300U processor (ULT), VGA/LVDS/iDP, Dual GbE, USB 3.0, PCIe Mini, SATA 6GB/s Audio, iRIS-1010 and RoHS
WAFER-ULT-i1-i3-R10 3.5" SBC supports Intel® 22nm 4th Generation Mobile Core™ i3-4010U processor (ULT), VGA/LVDS/iDP, Dual GbE, USB 3.0, PCIe Mini, SATA 6GB/s Audio, iRIS-1010 and RoHS
WAFER-ULT-i1-C-R10 3.5" SBC supports Intel® 22nm 4th Generation Mobile Celeron™ 2980U processor (ULT), VGA/LVDS/iDP, Dual GbE, USB 3.0, PCIe Mini, SATA 6GB/s Audio, iRIS-1010 and RoHS
iRIS-1010-R10 IPMI 2.0 adapter card with AST1010 BMC chip (W/O KVM over IP function) for PCIe Mini socket interface
32000-023800-RS PS/2 KB/MS cable
19800-000300-200-RS RS-232 cable
32205-003800-300-RS RS-422/485 cable, 200mm
DP-LVDS-R10 DisplayPort to 24-bit dual-channel LVDS converter board (for IEI iDP connector)
DP-HDMI-R10 DisplayPort to HDMI converter board (for IEI iDP connector)
DP-DVI-R10 DisplayPort to DVI-D converter board (for IEI iDP connector)
DP-VGA-R10 DisplayPort to VGA converter board (for IEI iDP connector)
DP-DP-R10 DisplayPort converter board (for IEI iDP connector)


Please contact us for volume pricing.


We like to make life easier, for further help and assistance with this product click to our FAQ's page.

Want more help to find a solution? Contact us or check out our design capabilities.