Please enter some search terms and try again.

NF3E-4300U/5350U Haswell - 3.5" Embedded Intel® Haswell U-series EBC

Product image
Datasheet

Product Detail

- Intel Haswell i5 Class vPro SoC Processor 15W
- Embedded Long-life 3.5" SBC Series, 5 Year Availability
- CPU on Bottom for Easy Integration into Fanless Systems
- Supports up to 3 display, 2 x HDMI 4K and 24bit LVDS
- Built-in Wide Range +9V – 24V DC jack
- ECO-design for EuP/ErP

See also

 

Specification

Jetway NF3E 3.5" SBC Motherboard
Processor Intel® Core i5-4300U, 1.90GHz – 2.90GHz Burst, 2-Core 4-Thread, 15W TDP, vPro
* Ships with passive heatsink installed for bench testing
Memory 2 x 204-pin DDR3L-1600 SO-DIMM Dual Channel up to 16GB
Graphics Intel HD Graphics 4400, 200MHz - 1.1GHz
Audio Realtek ALC662 HD Audio codec
LAN 1 x Intel i218LM PHY Gigabit LAN (iAMT 9.5)
1 x Intel i211AT PCI-E Gigabit LAN
Storage 1 x SATA3 6Gb/s Connector
1 x Shared mSATA/mini-PCI Express Combo slot (Full-size)
Super IO FINTEK F81866A
Back Panel Connectors
1 3.5mm Audio connector (Line-OUT with SPDIF Out)
2 HDMI
4 USB 3.0
2 RJ45 LAN (10/100/1000)
2 USB 2.0
1 +9V ~ +24V DC-in Jack
Onboard I/O Connectors
1 SATA3 6Gb/s Connector
1 Shared mSATA/mini-PCI Express Combo slot (full-size)
1 Mini-PCI Express slot (half-size)
4 Serial port headers (3 * RS232, 1 * RS232/422/485)
2 USB Pin Headers for up to 3 additional USB 2.0 Ports
1 24-bit dual channel LVDS connector/inverter (CHRONTEL CH7511B chipset up to 1920 x 1200)
1 8 bit GPIO Header
1 AT/ATX Mode jumper
1 PS/2 Mouse/Keyboard header
1 Chassis Intrusion header
2 2-pin LAN LED header
1 2-pin SPDIF header
1 4-pin SMBUS header
1 9-pin Audio Connector
1 Front Reset/Power buttons
1 4-pin Fan Header
1 4-pin Floppy Power Output (Male)
Power Supply for NF3E
External Power Supply – the board can be powered with a +9V ~ +24V external power supply though a DC connector on the back panel. The rear +9V ~ +24V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9V ~ +24V and the shell is GND.


Please contact us for volume pricing.


We like to make life easier, for further help and assistance with this product click to our FAQ's page.

Want more help to find a solution? Contact us or check out our design capabilities.