Please enter some search terms and try again.

WUAAAA120 V0000N0NX00 - Embedded ARM SBC

Embedded ARM based SBC motherboard supports Android 4.2
Datasheet

Overview

This module is a single board computer (SBC) based on the NXP i.MX6 embedded System-on-chip (SoC). The SoC features a scalable multi-core ARM Cortex™ A9 processor with one to four corresponding versions. The module delivers high CPU and graphical performance with minimum power consumption. The module incorporates DVFS (Dynamic Voltage and Frequency Scaling) and Thermal Throttling which enables the system to adjust operating frequency and voltage continuously. By changing in workload and temperature, it can be adjusted to be the best performance with the lowest power consumption.

The module targets a wide range of applications, including: Digital Signage, Medical Devices, Navigation, Industrial Automation, HMIs, Avionics, Entertainment system, POS, Data Acquisition, Thin Clients, Robotics, Gaming and more. It offers a wide range of interfaces from simple GPIOs, industry standard I2C, SPI, and UART buses through to high speed USB 2.0 interface and a 16/32bit external memory bus (parallel bus). The RGB and LVDS interface offer users to connect with high resolution displays.

The module operates with the Android 4.2.2 Operating System and supports additional Operating Systems. Please contact us for further details.

Features

  • CPU: ARM
  • Motherboard only
  • Single Board Computer (SBC)
  • Power Supply: DC12V
  • NXP Cortex-A9 Dual / Quad core @1.0GHz
  • On-board DDR3 up to 2GB & 8GB eMMC NAND Flash
  • Support LVDS high solution display & RGB Parallel interface
  • Full HD Decoder, 2D/3D, OpenGL
  • Low power consumption
  • Support Android 4.2.2
  • Support TFT Modules from 5"~12.1" (Support RGB & LVDS)
  • Support RGB & LVDS interfaces

Specifications

CPU Technology NXP Cortex-A9 Dual core 1.0GHz (Quad core option)
  Memory DDR3 1GB x64 bit at 400MHz
  Capacity Onboard DDR3 1GB (2GB Max)
  Flash  4GB (8GB Max) eMMC NAND Flash for Advantech boot loader
Graphics LVDS Dual output 24 bit LVDS(1024x600 or 1024x768)
  RGB 18-bits/24-bits TTL with DE+H/V sync(800x480)
  Graphic engine 3D GPU with 1 shadow
  H/W Vodeo codec Support MPEG 1/2/4, H.262 Hardware Decoder.
  MIPI Reserved
Ethernet Speed Ethernet 10/100/1000
  USB 2 x USB 2.0 Host ;1 x USB 2.0 OTG
2 x pin header
I/O Audio Wolfson (Line out)
  Serial port RS232 (1*DB9 ) ; RS485/422/232 (1 * pin header)
  SPI 2 (Host, option) 
  IIC 2 (Client, option)
  Touch 4-wire Resistive type(onboard)/ PCAP is driven IIC interface
  GPIO 16-pin 3.3V TTL Level GPIOs 
Expansion SD Socket 1 * SD Slot
Power Voltage DC12V
  Consumption 2.5W
Environment Temperature -10°C~60°C Operating / -20°C~70°C Storage
Dimensions Motherboard 114mm * 95mm * 20mm

 

Drawing


Please contact us for pricing.


We like to make life easier, for further help and assistance with this product click to our FAQ's page.

Want more help to find a solution? Contact us or check out our design capabilities.