Please enter some search terms and try again.

WUAAAA120 V070BTITX00 - Embedded ARM TFT 7" LVDS with Resistive TS

Embedded ARM based SBC with 7 inch TFT and LVDS connection and resistive touch screen
Datasheet

Overview

The module is an ARM based Single Board Computer (motherboard) with built-in 1024x600 resolution 7 inch TFT LCD display.  This 7 inch embedded TFT model is featured with a 4-wire Resistive touch screen (RTS).  This model supports LVDS interface and Android 4.2.2 Operating System.
 
The Android Embedded Board on this model is a Single Board Computer (SBC) based on the NXP i.MX6 embedded System-on-chip (SoC). The SoC features a scalable multi-core ARM Cortex™ A9 processor with one to four corresponding versions. The module delivers high CPU and graphical performance with minimum power consumption.
 
The Embedded Computer Board incorporates DVFS (Dynamic Voltage and Frequency Scaling) and Thermal Throttling which enables the system to adjust operating frequency and voltage continuously. By changing in workload and temperature, it can be adjusted to be the best performance with the lowest power consumption.

Features

  • Single Board Computer (SBC)
  • CPU: ARM
  • TFT Size: 7"
  • Resolution: 1024×600
  • View Direction: 12H
  • Interface: LVDS
  • Touch Screen: With resistive touch panel
  • Power Supply: DC12V
  • Operating System: Android 4.2.2
  • Android Embedded Board

Specifications

Embedded Single Board Computer

CPU Technology NXP Cortex-A9 Dual core 1.0GHz (Quad core option)
  Memory DDR3 1GB x64 bit at 400MHz
  Capacity Onboard DDR3 1GB (2GB Max)
  Flash  4GB (8GB Max) eMMC NAND Flash for Advantech boot loader
Graphics LVDS Dual output 24 bit LVDS(1024x600 or 1024x768)
  RGB 18-bits/24-bits TTL with DE+H/V sync(800x480)
  Graphic engine 3D GPU with 1 shadow
  H/W Vodeo codec Support MPEG 1/2/4, H.262 Hardware Decoder.
  MIPI Reserved
Ethernet Speed Ethernet 10/100/1000
  USB 2 x USB 2.0 Host ;1 x USB 2.0 OTG
2 x pin header
I/O Audio Wolfson (Line out)
  Serial port RS232 (1*DB9 ) ; RS485/422/232 (1 * pin header)
  SPI 2 (Host, option) 
  IIC 2 (Client, option)
  Touch PCAP is by driven IIC interface
  GPIO 16-pin 3.3V TTL Level GPIOs 
Expansion SD Socket 1 * SD Slot
Power Voltage DC12V
  Consumption 2.5W
Environment Temperature -10°C~60°C Operating / -20°C~70°C Storage
Dimensions Motherboard 114mm * 95mm * 20mm

 

TFT Specifications

TFT7-LVDS-RTS Dimension Unit
Size 7.0 Inch
Dot Matrix 1024 × RGB × 600(TFT) Dots
Module Dimension 165.0(W) × 99.8(H) × 14.35(D) mm
Active Area 154.2114 × 85.92 mm
Dot Pitch 0.1506 × 0.1432 mm
LCD Type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Aspect Ratio 16:9
Backlight Type LED, Normally White
With/Without TP With RTP
Interface LVDS
Surface Anti-Glare

 

Drawing


Please contact us for pricing.


We like to make life easier, for further help and assistance with this product click to our FAQ's page.

Want more help to find a solution? Contact us or check out our design capabilities.