Please enter some search terms and try again.

WF62ATXGRDNN0 - 640x320 6.2" TFT LCD Monochrome Panel

640x320 6.2 inch TFT LCD Monochrome Panel
Datasheet

Overview

The WF62ATXGRDNN0 is a graphic 6.2" TFT LCD 640 x 320 monochrome display. The external dimensions of the display are 170.32 x 88.3 x 5.3 mm, and the active area is 140 x 70 mm. What is important, it is a monochrome model, but applied in the active matrix TFT, which allows for high contrast (800:1) and short response times.


The WF62ATXGRDNN0 is with normally black VA LCD type which is feature with wider view angle. It is a special technology, not like common color TFT, monochrome TFT has a very good contrast radio. TFT LCD monochrome display is an ideal high performance display for automotive and industrial applications where there may be fewer requirements for full color. Driving the display is less complex yet monochrome TFT still offers the same performance characteristics as full color TFT.


This display does not need an extended controller board to drive MCU control. The display can operate in mode 2, 4 or 16 shades of gray scale, depending on the settings. Because the display driver supports several communication modes: 3 - or 4-line serial interface and an 8-bit parallel interface compatible with standard systems with 8080 or 6800 family, the desired mode is selected by user to choose appropriate interface to control the device system. It is also worth mentioning the possibility of introducing the device in sleep mode, which does not clear the memory contents of the display.

Features

  • TFT LCD Monochrome
  • Display Format: 640x320
  • Size: 6.2"
  • View Direction: VA Glass
  • Interface: MCU
  • Built-in Controller: ST7511
  • Brightness(cd/m2): 600
  • Frame Through Hole: Yes
     

Specifications

Interface

Pin Symbol Function
1 GND System ground
2 VDD Power Supply : +3.3V
3 NC No connect
4 A0 Data/Command select
5 /WR(R/W) Write strobe signal
6 /RD(E) Read strobe signal
7~14 DB0~DB7 Data bus
15 /CS Chip select
16 /RESET(RSTB) Hardware reset
17~18 IF0~IF1 Mode select
19~22 NC No connect

 

General Specifications

Item Dimension Unit
Size 6.2 inch
Dot Matrix 640 × 320 dots
Module dimension 170.32 × 88.3 × 5.3 mm
Active area 140 × 70 mm
Dot pitch 0.21875 × 0. 21875 mm
LCD type TFT, Normally Black, Transmissive
View Direction Wide View
Gray Scale 16 Gray scale (4BPP)/ 4 Gray scale (2BPP)/ 2 Gray scale (1BPP)
Driver IC ST7511U
Backlight Type LED, Normally White
Touch Panel Without touch panel
Surface Glare

 

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 - +70 °C
Storage Temperature TST -30 - +80 °C

 

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VDD - 3.0 3.3 3.6 V
Supply Current For LCM IDD - - 25 38 mA
Power Consumption - - - 83 137 mW

Drawing


Please contact us for pricing.


We like to make life easier, for further help and assistance with this product click to our FAQ's page.

Want more help to find a solution? Contact us or check out our design capabilities.