Please enter some search terms and try again.

DN2800MT - Mini-ITX N2800 Slimline / Low Profile Motherboard

Product image
Datasheet

Product Specifications

 Form Factor
Dimensions - Mini-ITX (6.7-in x 6.7-in) Low Profile
  - Half height I/O shield supplied
 Processor System
CPU - Intel® Dual-Core Atom™ CedarView Processor N2800
- Supports Hyper-Threading Technology
- Supports Untied Overclocking Technology
Core Number - 2
Max Speed - 1.86 GHz
L3 Cache - N/A
Chipset - NM10
BIOS - UEFI
 Expansion Slot
PCI - No
Mini-PCIe - 1 (Half Size) + 1 (Full Size, shared with m-SATA)
mSATA - 1 (share with mini-PCIe)
PCIe - 1 (x1)
CFast Card Socket - No
 Memory
Technology - Single Channel DDR3 800/1066 MHz SDRAM
Max. - 4GB
Socket - SO-DIMM x 2
 Graphics
Controller - Intel® PowerVR SGX545, Support Directx9 compliant Pixel Shader v3.0 & OGL 3.0
VRAM - Shared Memory
DSub - Yes, supports max resolution 1920x1200
LVDS - Dual Channel 24-Bits, max resolution 1920 x 1200 @ 60Hz
HDMI - 1
DVI - No
DisplayPort - No
MultiDisplay - Yes (Dual Display)
 Ethernet
Ethernet - 10/100/1000 Mbps
Controller - GbE LAN: 1 x Intel 82574L
Connector - RJ-45 x 1
 SATA
Max Data Transfer Rate - SATA2 3.0Gb/s
 Rear I/O
VGA - D-Sub x 1
DVI - No
HDMI - 1
DisplayPort - No
Ethernet - 1
USB - 4
Audio - 2 (Mic-in, Line-out)
Serial - No
PS2 - No
 Internal Connector
USB - 4 (USB 2.0 compliant)
LVDS / inverter - 1/1
VGA - 1 (shared with rear I/O VGA COM)
Serial - 2 ( RS232) / 4 from TPM header
IDE - No
SATA - 2 x SATA2 ( 3.0Gb/s)
mPCIe - 1 + 1 shared
Parallel - 1
mSATA - 1 shared
IrDA - No
GPIO - 4 in / 4 out
SATA PWR Output Con - 1
Speaker Header - 1
 Watchdog Timer
Output - From Super I/O to drag RESETCON#
Interval - 256 segments, 0,1,2…255sec/min
 Power Requirements
Input PWR - 9~19V DC-In (DC-Jack or 2-pin PWR Con)
Power On AT/ATX Supported
- AT : Directly PWR on as Power input ready
- ATX: Press Button to PWR on after Power input ready
 Environment
Temperature - 0ºC – 60ºC

The specification is subject to change without notice in advance. The brand and product names are trademarks of their respective companies.
Any configuration other than original product specification is not guaranteed.

Please contact us for a quotation.

Please contact us for volume pricing.


We like to make life easier, for further help and assistance with this product click to our FAQ's page.

Want more help to find a solution? Contact us or check out our design capabilities.