01489 780144
.jpg?resize=w[200]q[100])
The UTX-110/111 is an embedded board UTX form factor featuring a choice of Intel Baytrail CPU dual core or quad core. Power is from an external 12Volt PSU.
Product Specifications
| Form Factor | |
| Dimensions | - 111.76 x 116.84 mm(10 layer) |
| Processor System | |
| CPU |
- Intel® new Atom™ Baytrail-I |
| Core Number | - (By CPU, Max 4) |
| Max Speed | - (By CPU) |
| L2 Cache | - (By CPU) |
| Chipset | - (By CPU) |
| BIOS | - UEFI |
| Expansion Slot | |
| PCI | - 0 |
| Mini-PCIe | - 1 x full size co-lay with mSATA |
| mSATA | - 1 (Full Size) |
| PCIe | - 0 |
| SIM | - 1 |
| CFast Card Socket | - 0 |
| Memory | |
| Technology | - Single Channel DDR3L 1066/1333 MHz SDRAM |
| Max. | - 4/8GB |
| Socket | - 1 x SO-DIMM |
| Graphics | |
| Controller | - Intel® Gen7 Intel® Graphics DX 11*, OGL3.2 |
| VRAM | - Shared Memory |
| VGA | - Supports max. resolution 1920X1200 |
| LVDS | - Dual channel 24-bit, max resolution 1920 x 1200@60Hz |
| HDMI | - Supports HDMI 1.4a, max resolution 1920 x 1200 |
| DVI | - No |
| DisplayPort | - No |
| MultiDisplay | - Yes (Dual Display) |
| Ethernet | |
| Ethernet | - 10/100/1000 Mbps |
| Controller | - 2 x Intel® 210 |
| Connector | - 2 x RJ-45 |
| SATA | |
| Max Data Transfer Rate | - SATA2 (3.0Gb/s) |
| Rear I/O | |
| VGA | - 0 |
| DVI | - 0 |
| HDMI | - 2 (1 x HDMI, 1 x Mini HDMI) |
| DisplayPort | - 0 |
| Ethernet | - 2 |
| USB | - 1 x USB 3.0 Compliant , 1 x USB2.0 Compliant 1 x mini USB 2.0 SMT type connector |
| Audio | - 1 ( Line out/Mic out) |
| Serial | - 0 |
| eSATA | - 0 |
| PS2 | - 0 |
| Internal Connector | |
| USB | - 0 |
| LVDS / inverter | - 1/1 |
| VGA | - 1 (Pin heater 2.0 mm Pitch) |
| Serial | - (RS-232/422/485 x 1. RS232 x 1) Pin heater 2.0 mm pitch COM1 Pin9 (+5V & +12V) |
| SATA | - 1 x SATA2 (3.0Gb/s) |
| mPCIe | - 2 (full/Half size) |
| Parallel | - 0 |
| mSATA | - 1 |
| IrDA | - 0 |
| GPIO 8-bit | - 4 x GPI + 4 x GPO Pin heater 2.0 mm pitch |
| SATA PWR Output Con | - 1 |
| Speaker Header | - 1 |
| Watchdog Timer | |
| Output | - From Super I/O to drag RESETCON# |
| Interval | - 256 segments, 0,1,2…255sec/min |
| Power Requirements | |
| Input PWR | - 12V DC Jack |
| Power On | AT/ATX Supported - AT: Directly PWR on as Power input ready - ATX: Press Button to PWR on after Power input ready |
| Environment | |
| Temperature | - 0ºC – 60ºC |
The specification is subject to change without notice in advance. The brand and product names are trademarks of their respective companies. Any configuration other than original product specification is not guaranteed.
For more information view the press release HERE
See also
