Please enter some search terms and try again.

WF70QTIFGDBN0 - 800x400 7" TFT LCD Panel with SSD1963 Controller

800x400 7 inch TFT LCD Panel with SSD1963 Controller Board
Datasheet

Overview

The 7.0 inch WF70QTIFGDBN0 TFT LCD (resolution 800x480) has a built in SSD1963 controller board plus a 36 pin connector on board. This model is available in 8080 family MPU 8bit/16bit options and with pin no. 33 ~ 36 already defined as a backlight supply; so there is no need to design an extra backlight circuit. This display module has dimensions of 165x100 mm and AA size of 154.08 x 85.92 mm.

Features

  • Display Format: 800 x 480
  • Size: 7.0"
  • View Direction: 12H
  • Interface: MCU
  • Built-in Controller: SSD1963
  • Control-Board: Yes
  • Brightness(cd/m²): 460

Specifications

Interface

Pin Symbol Function
1 GND System ground pin of the IC . Connect to system ground.
2 VDD Power Supply : +3.3V
3 BLE Backlight control signal , H: On \ L: Off
4 D/C Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~14 DB0~DB7 Data bus
15~22 DB8~DB15 Data bus (When select 8bits Mode, this pin is NC)
23~24 NC No connect
25 CS Chip select
26 RST Hardware reset
27 L/R Left / right selection; Default L/R=H
28 U/D Up/down selection; ; Default U/D=L
29~32 NC No connect
33~34 VLED- Power for LED Driver IC(GND)
35~36 VLED+ Power for LED Driver IC(+5V)

 

General Specifications

Item Dimension Unit
Size 7.0 inch
Dot Matrix 800 × RGB × 480(TFT) dots
Module dimension 165.0(W) × 100.0(H) × 11.5(D) mm
Active area 154.08 × 85.92 mm
Dot pitch 0.0642 × 0.179 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Backlight Type LED,Normally White
Controller IC SSD1963
Interface Digital 8080 family MPU 8bit/16bit
Touch Panel Without touch panel
Surface Anti-Glare

 

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 - +70 °C
Storage Temperature TST -30 - +80 °C

 

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VDD - 3.0 3.1 3.3 V
Supply Current For LCM IDD - - 300 450 mA

 

Drawing


Please contact us for more information.


Share with:

We like to make life easier, for further help and assistance with this product click to our FAQ's page.

Want more help to find a solution? Contact us or check out our design capabilities.


Windows Embedded Partner