Please enter some search terms and try again.

PMC-USB2 USB2.0 PMC Module is RoSH Compliant - 26/07/2005

PMC-USB2   USB2.0 PMC Module is RoSH Compliant

The PMCUSB2 from BVM Limited is a 5 channel USB2 PMC USB controller module.

This is the first in a new family of PMC modules designed from scratch to fully meet the RoSH requirements. It features three USB 2.0 ports accessible via the front panel and a further two either via the rear I/O on PMC P4 connector or via the 10-pin on-board connector. Using the NEC ?PD720101 5 port USB2 PCI controller the PMCUSB2 is compatible with both OHCI (USB1) and EHCI (USB2) ensuring drivers are available for most popular operating systems. USB2.0 transfers are significantly faster than USB1 with data transfers possible at up to 480Mb/Sec.

Each port has power supplied by an LM3526 providing regulation and protection. Designed for use in both VMEbus and CompactPCI environments the rear I/O ports are fed out via P4 and a PICMG compatible PIM module is available providing two further sockets on the rear panel.

This unit is available now in a fully RoSH compliant design. The environmental specification is 0ºC - 70ºC and provision is made to allow conduction cooling where required.


« Back to news index