Asrock UTX Embedded Intel Atom EBC – UTX-110-UTX-111


Asrock – UTX-110-UTX-111 – UTX Embedded Intel Atom EBC | Motherboard | UTX Embedded Board

SKU: EOL_UTX-110-UTX-111 Category:


The UTX-110/111 is an embedded board UTX form factor featuring a choice of Intel Baytrail CPU dual core or quad core.  Power is from an external 12Volt PSU.

Product Specifications

 Form Factor
Dimensions– 111.76 x 116.84 mm(10 layer)
 Processor System

– Intel new Atom Baytrail-I
– Supports Hyper-Threading Technology
– Default E3826 Dual core processor
– Optional E3845/E3815 Quad/Single Core Processor
– Optional J1900/N2930 Quad Core Processor
– Optional N2807 Dual Core Processor

Core Number– (By CPU, Max 4)
Max Speed– (By CPU)
L2 Cache– (By CPU)
Chipset– (By CPU)
 Expansion Slot
PCI– 0
Mini-PCIe– 1 x full size co-lay with mSATA
mSATA– 1 (Full Size)
PCIe– 0
SIM– 1
CFast Card Socket– 0
Technology– Single Channel DDR3L 1066/1333 MHz SDRAM
Max.– 4/8GB
Socket– 1 x SO-DIMM
Controller– Intel Gen7 Intel Graphics DX 11*, OGL3.2
VRAM– Shared Memory
VGA– Supports max. resolution 1920X1200
LVDS– Dual channel 24-bit, max resolution 1920 x 1200@60Hz
HDMI– Supports HDMI 1.4a, max resolution 1920 x 1200
DisplayPort– No
MultiDisplay– Yes (Dual Display)
Ethernet– 10/100/1000 Mbps
Controller– 2 x Intel 210
Connector– 2 x RJ-45
Max Data Transfer Rate– SATA2 (3.0Gb/s)
 Rear I/O
VGA– 0
DVI– 0
HDMI– 2 (1 x HDMI, 1 x Mini HDMI)
DisplayPort– 0
Ethernet– 2
USB– 1 x USB 3.0 Compliant , 1 x USB2.0 Compliant 1 x mini USB 2.0 SMT type connector
Audio– 1 ( Line out/Mic out)
Serial– 0
eSATA– 0
PS2– 0
 Internal Connector
USB– 0
LVDS / inverter– 1/1
VGA– 1 (Pin heater 2.0 mm Pitch)
Serial– (RS-232/422/485 x 1. RS232 x 1) Pin heater 2.0 mm pitch COM1 Pin9 (+5V & +12V)
SATA– 1 x SATA2 (3.0Gb/s)
mPCIe– 2 (full/Half size)
Parallel– 0
mSATA– 1
IrDA– 0
GPIO 8-bit– 4 x GPI + 4 x GPO Pin heater 2.0 mm pitch
SATA PWR Output Con– 1
Speaker Header– 1
 Watchdog Timer
Output– From Super I/O to drag RESETCON#
Interval– 256 segments, 0,1,2…255sec/min
 Power Requirements
Input PWR– 12V DC Jack
Power OnAT/ATX Supported
– AT: Directly PWR on as Power input ready
– ATX: Press Button to PWR on after Power input ready
Temperature– 0ºC – 60ºC

The specification is subject to change without notice in advance. The brand and product names are trademarks of their respective companies. Any configuration other than original product specification is not guaranteed.

For more information view the press release HERE

See also