Asrock 3.5″ Embedded Intel Celeron J1900/N2930 EBC – SBC-210

Compare

Asrock – 3.5″ Embedded Intel Celeron J1900/N2930 EBC – SBC-210 – Celeron

SKU: EOL_SBC-210 Category:

Description

Product Specifications

 Form Factor
Dimensions– 3.5″ SBC (5.8-in x 4.0-in)/ ( 148 x 102 mm)
 Processor System
CPU– Intel new Atom Baytrail-M/D Supports Hyper-Threading Technology
Core Number– 4
Max Speed– (By CPU)
L3 Cache– 2MB
Chipset– N/A
BIOS– UEFI
 Expansion Slot
PCI– 0
Mini-PCIe– 1 (Half Size) + 1 (Full Size) shared with mSATA
mSATA– 1 (Full Size) shared with SATA2
PCIe– 0
CFast Card Socket– 0
 Memory
Technology– Single Channel DDR3L 1333 MHz SDRAM
Max.– 8GB
Socket– 1 x SO-DIMM
 Graphics
Controller– Intel Gen7 Intel Graphics DX 11, OGL3.2
VRAM– Shared Memory
VGA– Supports max. resolution 1920×1200
LVDS– Dual Channel 24-bit, max resolution 1920×1200@60Hz
HDMI– Supports HDMI 1.4a, max resolution 1920×1200
DVI– No
DisplayPort– No
MultiDisplay– Yes (Dual Display)
 Ethernet
Ethernet– 10/100/1000 Mbps
Controller– GbE LAN: Realtek RTL8111G-CG
Connector– 2 x RJ-45
 SATA
Max Data Transfer Rate– SATA2 (3.0Gb/s)
 Rear I/O
VGA– 1
DVI– 0
HDMI– 1
DisplayPort– 0
Ethernet– 2
USB– 2 (USB 3.0 compliant)
Audio– 1 (Line out)
Serial– 0
eSATA– 0
PS2– 0
 Internal Connector
USB– 6 (3 x 2.54 pitch header USB 2.0 compliant)
LVDS / inverter– 1/1
VGA– 0
Serial– 4 (RS-232)
SATA– 2 x SATA2 ( 3.0Gb/s)
mPCIe– 1
Parallel– 0
mSATA– 1 (shared)
IrDA– 0
GPIO 8-bit– 4 x GPI + 4 x GPO
SATA PWR Output Con– 1
Speaker Header– 1
 Watchdog Timer
Output– From Super I/O to drag RESETCON#
Interval– 256 segments, 0,1,2…255sec/min
 Power Requirements
Input PWR– 9-36V DC-In using 4-pin ATX PWR Con
Power OnAT/ATX Supported
– AT : Directly PWR on as Power input ready
– ATX: Press Button to PWR on after Power input ready
 Environment
Temperature– 0ºC – 60ºC

The specification is subject to change without notice in advance. The brand and product names are trademarks of their respective companies. Any configuration other than original product specification is not guaranteed.