DFI COM335 Micro-ATX – COMe Basic/Compact Carrier Board

  • Product Name: DFI COM335
  • Motherboard Form Factor: Micro-ATX
  • CPU: Supports COMe Basic/Compact modules
  • RAM: Supports Compact and Basic modules
  • Expansion: Multiple displays (VGA, LVDS, DP, eDP)
  • Other features: Rich I/O (1 GbE, 4 USB 3.1, 4 USB 2.0)
Product Compare

Description

  • DFI COM Express R3.1, Pin-out Type 6 & Type 10
  • Support Compact and Mini modules
  • Multiple displays: VGA, LVDS, DP, eDP
  • Rich I/O: 1 GbE, 3 USB 3.1, 4 USB 2.0
  • microATX form factor

Specification

Graphics
Display
1 x VGA
1 x LVDS/eDP (eDP available upon request)
3 x DP
1 x eDP/LVDS (LVDS available upon request)
Expansion
Interface
1 x PCIe x16
4 x PCIe x1
1 x M.2 M Key 2280
1 x SDIO
Audio
Audio Codec
Realtek ALC888S-VD2-GR
Rear I/O
Ethernet
1 x GbE (RJ-45)
USB
3 x USB 3.1 (Gen2)
4 x USB 2.0
Display
3 x DP
Audio
1 x Line-in
1 x Line-out
1 x Mic-in
Internal I/O
Serial
1 x Serial Interface Connector (TX/RX)
Display
1 x VGA (2.54mm)
1 x LVDS LCD Panel Connector
1 x LCD/Inverter Power
1 x eDP LCD Panel Connector
Audio
1 x Audio (Line-out/Mic-in)
1 x S/PDIF
SATA
4 x SATA 3.0 (up to 6Gb/s)
DIO
1 x 8-bit DIO
LPC
1 x LPC
SMBus
1 x SMBus
Power
Type
12V, 5VSB, VCC_RTC (ATX mode)
12V, VCC_RTC (AT mode)
Connector
4-pin ATX 12V power
24-pin ATX power
RTC Battery
CR2032 Coin Cell
Environment
Temperature
Operating: 0 to 60°C
Storage: -40 to 85°C
Humidity
Operating: 5 to 90% RH
Storage: 5 to 90% RH
MTBF
495,767 hrs @ 25C; 284,320 hrs @ 45C;
181,227 hrs @ 60C; 133,598 hrs @ 70C; 84,828 hrs @85C
Calculation Model: Telcordia Issue 2, Method Case 3
Environment: GB, GC – Ground Benign, Controlled
Mechanism
Dimensions
microATX Form Factor
244mm (9.6″) x 244mm (9.6″)
Compliance
PICMG COM Express® R3.1, Type 6 & Type 10
Compact, Mini Module
Standards and Certifications
Certifications
CE, FCC, RoHS
Packing List
Packing List
1 COM335 board
1 Serial ATA data cable (Length: 500mm), 332-553001-005G
Country of Origin
Country of Origin
Taiwan

Datasheet

Download

BVM Customisation Service

If you cant find an off the shelf product that meets your specific requirements speak with our in house design team who can customize an existing product or design a new product from start to finish.

 

If you’re unable to find an off-the-shelf product that meets your specific requirements, don’t hesitate to contact our in-house design team. They possess the expertise to customise an existing product to your exact specifications or embark on a fresh design journey to create a customized solution tailored to your requirements. Our design professionals are dedicated to delivering exceptional results, ensuring that the final product not only meets but exceeds your expectations. When you collaborate with our team, you open the door to a world of possibilities, where innovation and creativity converge to bring your vision to life.

Whether it’s modifying an existing product or crafting an entirely new one, our design experts are committed to providing you with a comprehensive, end-to-end solution that perfectly suits your needs. Your satisfaction is our top priority, and we’re here to turn your ideas into reality.

 

Design | Develop | Test | Manufacture

With over three decades of experience in designing custom industrial and embedded computer and display solutions across a wide array of industries, we’re here to turn your ideas into reality

 

Here’s a selection of our design, manufacturing & associated services: –

Design to Order Banner

Design to Order: OEM/ODM Embedded Product Design Services

For customers designing a brand-new product from scratch or working with an existing prototype.

Build to Order Banner

Build to Order: Embedded Computer Design and Customisation Services​

Take an existing system and we can:

Build to Order: Racks and Towers, Peli Case PCs and Mini-ITX PCs

Embedded Software Banner

Embedded Software Services : Configuration, Integration and Deployment

Porting, Integration & Deployment

 

ALL OUR DESIGN AND MANUFACTURING SERVICES INCLUDE:

Testing

Testing

Lifecycle

Materials Management

Logistics

Logistics and Tracking

Manufacturing

External Manufacturing

• Burn in Test
• Temp / Thermal Testing
• Environmental Testing
• Safety Testing
• Software Compatibility Test
• Vendor Selection and Component Procurement
• Product Traceability
• Obsolescence, End of Life and Last Time Procurement Management
• Simple to use on-line RMA System
• Traceability of Shipments
• Product Labelling
• OEM/Branded Packaging
• System Branding
• Custom Labels
• Surface Mount: – High Speed Placement
• Conventional Through Hole Insertion & Assembly
• Automated Optical Inspection
• Bespoke PCB Test

 

Click here to find out more.

BVM Custom Carrier Board Design Service:

If you cant find an “off the shelf” carrier board that meets your requirements speak with our in house design team who can customize an existing board or design a new one.

 

If you’re unable to find an off-the-shelf carrier board that meets your specific requirements, don’t hesitate to contact our in-house design team. They possess the expertise to customise an existing carrier board to your exact specifications or embark on a fresh design journey to create a customized solution tailored to your requirements. Our design professionals are dedicated to delivering exceptional results, ensuring that the carrier board not only meets but exceeds your expectations. When you collaborate with our team, you open the door to a world of possibilities, where innovation and creativity converge to bring your vision to life.

Whether it’s modifying an existing carrier board or crafting an entirely new one, our design experts are committed to providing you with a comprehensive, end-to-end solution that perfectly suits your needs. Your satisfaction is our top priority, and we’re here to turn your ideas into reality.

 

Custom Carrier Board 1

At BVM we have been designing custom carrier PCBs for many years and have experienced the changes in technology

From 16-bit CPU modules, disc and network interfaces to the latest high speed PCIe devices, custom power supplies – and, of course,  PCB carrier boards, BVM have built up a library of standard building blocks when it comes to producing bespoke electronic designs.

With our in-depth electronics engineering design experience, we’ll ensure your carrier PCB design is a successful one.

Regardless if your choice of COM/SOM module is X86 or ARM based – or even if your design stems from a developer platform such as Raspberry PiJetson, Beagle Bones, Arduino …etc, if your long-term vision lies in a COM/SOM module and custom carrier PCB  design for the product you want to bring to market, BVM will ensure your carrier PCB design meets your needs.

Our PCB prototyping and volume manufacturing services include:-

    • Selection and procurement of electronics components
    • PCB assembly
    • Wiring and cable harness assembly
    • Potting, encapsulation and heat shrinking
    • Product configuration and test (inclusive of design of bespoke rigs for testing)
    • Writing of test regime software

 

How can BVM help you with Carrier Board and PCB design?

    • Experience & expertise – With over 30 years of PCB design experience, we have an in-depth knowledge of carrier PCB board design, their assembly and all other associated aspects concerned with printed circuit board production.
    • BVM get it right first time……. The most important aspect of PCB design is accuracy, so it’s important to choose a design partner that provides you with trust backed up with a pedigree & track record in producing carrier designs.  BVM ensure your design will be right first time – whether that’s prototypes or further development & final production-ready units to take your product to market.
    • Design services based in the UK – BVM’s carrier PCB design services are completed by our in-house CAD team based in Southampton, Hampshire – ensuring the quality of design you’d expect from a British PCB designer

 

Click here to find out more.