| Processor System |
|
| |
|
| CPU |
Intel® Twin Lake Processors |
| IMB-1015J (N150, QC, Max Speed Up to 3.6GHz, 6W) |
| BIOS |
AMI SPI 256 Mbit |
| Form Factor |
|
| |
|
| Dimensions |
Mini-ITX (6.7-in x 6.7-in x 1.6-in, 17.0 cm x 17.0 cm x 4.1 cm) |
| Memory |
|
| |
|
| Technology |
Single Channel DDR4 3200 MHz |
| Capacity |
32GB |
| Socket |
1 x 260-pin SO-DIMM |
| Graphics |
|
| |
|
| Controller |
Intel® UHD Graphics |
| HDMI |
HDMI 2.0b |
| Max resolution up to 4096 x 2160@60Hz |
| VGA |
Max resolution up to 1920 x 1200@60Hz |
| LVDS |
Dual channel 24 bit up to 1920 x 1200@60Hz |
| (Connector shared with eDP) |
| eDP |
Max resolution up to 1920 x 1080@60Hz |
| (Connector shared with LVDS) |
| MultiDisplay |
Triple display |
| Expansion Slot |
|
| |
|
| PCIe |
1 x PCIe x1 (Gen3) |
| M.2 |
1 x M.2 (Key E, 2230) with PCIe x1, USB 2.0 and CNVi for Wireless |
| 1 x M.2 (Key B, 3042/3052) with PCIe x1, USB 3.2 Gen1, USB 2.0 and SIM for 4G/5G |
| SIM Socket |
1x SIM socket connected to M.2 key B |
| Audio |
|
| |
|
| Interface |
Realtek ALC897 HD, High Definition Audio. Mic-in, Line-out |
| Ethernet |
|
| |
|
| Controller/ Speed |
LAN1: Realtek RTL8125BG with 10/100/1000/2500 Mbps |
| LAN2: Realtek RTL8125BG with 10/100/1000/2500 Mbps |
| Connector |
2 x RJ-45 |
| Rear I/O |
|
| |
|
| HDMI |
2 x HDMI 2.0b |
| VGA |
1 |
| Ethernet |
2 x 1 Gigabit LAN |
| USB |
2 x USB 3.2 Gen1 |
| 2 x USB 2.0 |
| Audio |
2 (Mic-In, Line-Out) |
| COM |
COM1, COM2, COM3 (RS-232/422/485) |
| Internal Connector |
|
| |
|
| USB |
2 x USB 3.2 Gen1 (1 x USB 3.2 header) |
| 3 x USB 2.0 (1 x 2.54 pitch header, 1 x USB 2.0 Type-A vertical con) |
| COM |
COM4 (RS-232) |
| COM5 (RS-232 or TTL (optional)) |
| COM6 (RS-232 or ccTalk (optional)) |
| GPIO |
4 x GPI, 4 x GPO |
| LVDS |
1 (Connector with LVDS/eDP signal, switch by BIOS) |
| SATA PWR Output |
1 |
| Speaker Header |
1 |
| MIPI Camera Header |
1 (optional) |
| Security |
|
| |
|
| TPM |
TPM Header |
| Intel® PTT |
| Storage |
|
| |
|
| M.2 |
1 x M.2 (Key M, 2242/2260/2280) with PCIe Gen3 x1 or SATA3 for SSD |
| SATA |
1 x SATA3 (6Gb/s) |
| Watchdog Timer |
|
| |
|
| Output |
From Super I/O to drag RESETCON# |
| Interval |
256 Segments, 0, 1, 2, …255sec |
| Power Requirements |
|
| |
|
| Input PWR |
ATX-PWR (24+4-pin) and 12~28V DC-In co-design |
| Power On |
AT/ATX Supported |
| – AT : Directly PWR on as power input ready |
| – ATX : Press button to PWR on after power input ready |
| Environment |
|
| |
|
| Operating Temp |
-20°C ~ 70°C |
| Storage Temp |
-40°C ~ 85°C |
| Operating Humidity |
5% ~ 90% (non-condensing) |
| Storage Humidity |
5% ~ 90% (non-condensing) |
