What is the Difference Between Industrial & Commercial PCs?

Industrial vs Commecrial PCs

Comparing Industrial and Commercial PC Systems

Industrial grade embedded PC Systems are designed for use in environments where commercial grade PC Systems are not suitable. This is the case for a variety of reasons such as reliability, 24/7 operation, longevity of supply, sufficient thermal dissipation, extended temperatures of operation, weather extremes, poor power supply, support and serviceability.

It is often very tempting for Embedded PC System specifiers to see the chance to make cost savings by using commercial grade PC systems. This is a short sighted view as it ignores the reasons discussed here. Our industrial grade Mini-ITX for example look similar to their commercial counterparts which have been designed down to a price rather that for long term performance and reliability.

Differences in Delivering Commercial VS Industrial

How many times has a new office PC been delivered only for you to discover that it is completely different from the one you received a few months previously? This may not be a problem in the office environment but can cause serious issues in an industrial environment or where a larger product has been designed around it.

Commercial PCs are generally not intended for 24/7 operation and may therefore have a limited life expectancy. The failure of commercial grade PC systems can cause problems in the field as they are often installed in inaccessible locations or deeply embedded inside a machine of some type. It then becomes an expensive problem when service personnel have to be sent out to effect repairs or replacements.

Industrial grade components

Industrial grade systems are designed using industrial grade components such as wide temperature range solid state disks and memory. Industrial grade motherboards used in the systems are built using higher specification components such as capacitors which are designed with wider temperature ranges and a longer lifespan than those used in commercial grade motherboards.

The processor in industrial grade systems is chosen to give suitable performance with low power dissipation and the heat is usually removed conductively to avoid moving parts such as fans which are a point of failure. This prevents overheating in the industrial PC system and allows use at higher temperatures and sealed environments.  Typically industrial grade systems consume less power than commercial grade systems making them more efficient.

High grade materials are used in the construction of industrial grade systems which are hardwearing and do not degrade over time. By comparison commercial grade systems typically use plastic and thin metal which are not robust enough for the harsh environments where the systems are often used.

Industrial grade PC systems can often be specified as a sealed system to allow them to be used in difficult environments such as outside or in damp locations. The systems still need to function in these situations across a wide range of temperatures.

What Should be Considered?

Longevity of supply is also an important factor particularly when considering the longer term support of deployed systems. Many applications do not allow for the constantly changing specifications of commercial grade PC systems. Some OS software images cannot tolerate the hardware constantly changing and may fail to deploy or function correctly. Most industrial grade embedded PC systems have an availability and support for 7 years or more which is far greater than the usual 1 to 2 years for commercial grade PC systems. This allows a longer system design lifecycle which reduces the overall project cost over the lifetime costs of the project.

We like to make life easier ….

BVM supply a wide and diverse range of Industrial and Embedded Systems.
From Industrial Motherboards, SBCs and Box PCs, to Rack Mount computers and Industrial Panel PCs.

However, if you can’t find a solution that meets your needs from our wide & varied portfolio of standard products, speak to one of our team members around our bespoke design and manufacturing services. We can design a solution from ‘ground up’ – from concept to design – and through to system development and eventual mass production  manufacture.

You can either call us directly on +(0) 1489 780 144 and talk to one of the team | E-mail us at sales@bvmltd.co.uk | Use the contact form on our website

BVM Design and Manufacturing Services: The manufacturer behind the solutions you know

When a standard embedded design won’t suffice for what you need, you can always turn to BVM for help and use our custom design and manufacturing services.