Description
Overview
The IMB-1215 is the lower cost ‘brother’ of the IMB-1213. As you’ll see the IMB-1215 still retains a lot of the main features of the “full spec” IMB-1213 but with minor modifications around power, for example, where the standard is single power input (19V DC in) versus the standard wider range power input (12V/19V ~ 28V) of the IMB-1213.
Although there’s still the selectable option to go for a wider power input of 19V ~ 28V on the IMB-1215, if you need it. Additionally, there’s a PCIe x16 slot on the IMB-1215 which can be used for the choice of own graphics card or any other additional peripheral if you need this level of expansion. The IMB-1215 is perfect for digital signage – even the manufacture of your own panel pc solution if you need to make your system more compact and slim-line!
Features
- Socket LGA 1151 for Intel Core i7/i5/i3/Celeron
- Supports Dual Channel DDR4 SO DIMM 2400/2666, up to 32GB
- 3 x Displayport, 1 x eDP
- 4 xUSB 3.1, 4 xUSB 2.0, 2 x SATA3, 4 x COM
- 1 x PCIe x16, 1 x M.2 Key E , 2 x M.2 Key M
- 1 x TPM
- 19V DC-in (DC Jack/4-pin ATX PWR Con) (Option: +19V~28V)
- Supports RAID function
Specifications
| Form Factor | |
| Dimensions | Mini-ITX (6.7-in x 6.7-in) |
| Processor System | |
| CPU | Socket LGA 1151 for Intel Core i7/i5/i3/Celeron (Supports up to 65W) |
| Chipset | Intel Q370 (Bottom Side) |
| Expansion Slots | |
| PCIe | 1 xPCIe x16 (Support riser card) |
| Mini-PCIe | N/A |
| M.2 | 1x M.2 (Key E, 2230) with PCIe x1, CNVI and USB2.0 for Wireless |
| 1x M.2 (Key M, 2242/ 2280) with PCIe x4 and SATA3 for SSD supports NVMe | |
| 1x M.2 (Key M, 2242/2260) with PCIe x1 for SSD | |
| Memory | |
| Technology | Dual Channel DDR4 2400/ 2666 MHz |
| Max. | 32 GB |
| Socket | 2 x SO-DIMM |
| Graphics | |
| Controller | N/A |
| DVI | N/A |
| LVDS | N/A |
| HDMI | N/A |
| DisplayPort | Max resolution up to 4096×2304@60Hz |
| MultiDisplay | Triple Display |
| eDP | Max resolution up to 4096×2304@60Hz |
| Ethernet | |
| Ethernet | 10/100/1000 Mbps |
| Controller | 1 x Intel I219LM, 1 x Realtek RTL8111H |
| Rear I/O | |
| VGA | N/A |
| DVI | N/A |
| HDMI | N/A |
| DisplayPort | 3 x DP1.2++ |
| Ethernet | 2 |
| USB | 4 x USB3.1 |
| Audio | 2 (Mic-in. Line-out) |
| Serial | N/A |
| PS2 | N/A |
| Internal Connectors | |
| USB | 4 x USB2.0 |
| LVDS / inverter | N/A |
| eDP | 1 |
| VGA | N/A |
| Serial | 1 x COM(RS232/422/485), 3 x COM(RS-232) |
| SATA | 2 x SATA3 (6.0Gb/s) |
| GPIO | N/A |
| SATA PWR Output | 1 |
| Speaker Header | 1 |
| TPM | 1 x Onboard IC |
| Watchdog Timer | |
| Output | From Super I/O to drag RESETCON# |
| Interval | 256 segments, 0,1,2…255sec/min |
| Power Requirements | |
| Input PWR | 19V DC-in (DC Jack/ 4-pin ATX PWR Con) (Option: +19V~28V) |
| Power On | AT/ATX Supported |
| AT : Directly PWR on as power input ready | |
| ATX : Press button to PWR on after power input ready | |
| Environment | |
| Operating Temp | 0°C – 60°C |
| Storage Temp | -40°C – 85°C |
The specification is subject to change without notice in advance. The brand and product names are trademarks of their respective companies. Any configuration other than original product specification is not guaranteed.
