DFI RNO171 AMD Ryzen V2000 Mini-ITX

  • Product Name: DFI RNO171
  • Motherboard Form Factor: Mini-ITX
  • CPU: AMD Ryzen V2000
  • RAM: 2 DDR4 3200MHz SODIMM up to 64GB
  • Expansion: 1 PCIe x16, 1 M.2 M Key
  • Other features: Four independent displays: DP++ + DP++ + DP++ + DP++; Rich I/O: 2 GbE, 6 COM, 2 USB 3.1 Gen2, 7 USB 2.0, SATA 3.0; 10-Year CPU Life Cycle Support Until Q4′ 30 (Based on AMD Roadmap)

Description

Are you in need of a powerful yet compact motherboard for your industrial and embedded computing projects? Look no further than the DFI RNO171AMD Ryzen V2000 Mini-ITX SBC. With its impressive specifications and numerous application areas, this motherboard is a game-changer.

Key Features

  • AMD® Ryzen™ V2000 Mini-ITX
  • 2 DDR4 3200MHz SODIMM up to 64GB
  • Four independent displays: DP++ + DP++ + DP++ + DP++
  • Multiple expansion: 1 PCIe x16, 1 M.2 M Key
  • Rich I/O: 2 GbE, 6 COM, 2 USB 3.1 Gen2, 7 USB 2.0, SATA 3.0
  • 10-Year CPU Life Cycle Support Until Q4′ 30 (Based on AMD Roadmap)

RNO171 Specification

System
 
Processor
AMD® Ryzen™ V2000 Series Processors, BGA V2748
AMD® Ryzen™ V2748, 8C/16T, 4MB Cache, 7 CU, 2.9GHz (4.25GHz),45W
AMD® Ryzen™ V2546, 6C/12T, 3MB Cache, 6 CU, 3.0GHz (3.95GHz),45W
AMD® Ryzen™ V2718, 8C/16T, 4MB Cache, 7 CU, 1.7GHz (4.15GHz),15W
AMD® Ryzen™ V2516, 6C/12T, 3MB Cache, 6 CU, 2.1GHz (3.95GHz),15W
Memory
Two 260-pin SODIMM up to 64GB
Dual channel DDR4 up to 3200MHz (ECC/ non ECC support)
BIOS
AMI BIOS
Graphics
 
Controller
AMD® RadeonTM VEGA7 Graphics
Feature
OpenGL 4.6, DirectX 12, OpenCL 2.1
HW Decode: AVC/H.264, MPEG2, VC1/WMV9, JPEG/MJPEG, HEVC/H265, VP8, VP9
HW Encode: MPEG2, AVC/H264, JPEG, HEVC/H265, VP8, VP9
Display
4 x DP++
DP++: resolution up to 4096×2160 @ 60Hz
Expansion
 
Interface
1 x PCIe x16 (x8 Gen3)
1 x M.2 2280 M Key (SATA 3.0/ PCIe x4) (support 2242 by BOM opt.)
Audio
 
Audio Codec
Realtek ALC888S-VD2-GR
Ethernet
 
Controller
2 x Realtek RTL8111HN-CG (10/100/1000Mbps)
Rear I/O
 
Ethernet
2 x GbE (RJ-45)
Serial
1 x RS-232/422/485 (DB-9)
1 x RS-232 (DB-9)
USB
2 x USB 3.1 Gen2
2 x USB 2.0
Display
4 x DP++
Audio
1 x Mic-in
1 x Line-in
1 x Line-out
Internal I/O
 
Serial
4 x RS-232 (2.0mm pitch) (TX/RX signal only)
USB
4 x USB 2.0 (2.54mm pitch) (One signal is shared with the USB 2.0 Vertical Type A)
1 x USB 2.0 Vertical Type A
Audio
1 x S/PDIF
1 x Audio (Mic-in/Line-out)
SATA
2 x SATA 3.0 (up to 6GB/s) (with 7-pin VCC support)
2 x SATA Power
Watchdog Timer
 
Output & Interval
System Reset, Programmable via Software from 1 to 255 Seconds
Security
 
TPM
TPM2.0
Power
 
Type
Single 12V +/-5% DC
Connector
Straight Type Connector (4-pin)
DC-in Jack (available upon request)
Right Angle Connector (4-pin) (available upon request)
Consumption
TBD
RTC Battery
CR2032 Coin Cell
OS Support
 
Microsoft
Windows 10
Linux
Linux
Environment
 
Temperature
Operating: -5 to 65°C
Storage: -40 to 85°C
Humidity
Operating: 10 to 90% RH
Storage: 10 to 90% RH
MTBF
TBD
Mechanism
 
Dimensions
Mini-ITX Form Factor
170mm (6.7″) x 170mm (6.7″)
Packing List
 
Packing List
1 RNO171 motherboard
1 I/O shield A49-GH1710-000G
1 Cooler TBD
Country of Origin
 
Country of Origin
Taiwan

BVM Customisation Service

Design | Develop | Test | Manufacture

If you cant find an off the shelf product that meets your specific requirements speak with our in house design team who can customize an existing product or design a new product from start to finish. With extensive industrial and embedded computing experience, we deliver reliable, high-performance solutions tailored to your requirements.

 

Here’s a selection of our design, manufacturing & associated services: –

Design to Order Banner

Design to Order: OEM/ODM Embedded Product Design Services

For customers designing a new product or working with an existing prototype.

Build to Order Banner

Build to Order: Computer Design and Customisation Services​

Take an existing system and we can:

Build to Order: Racks and Towers, Peli Case PCs and Mini-ITX PCs

Embedded Software Banner

Embedded Software: Configuration, Integration and Deployment

Porting, Integration & Deployment

 

ALL OUR DESIGN AND MANUFACTURING SERVICES INCLUDE:

Testing

Testing

Lifecycle

Materials Management

Logistics

Logistics and Tracking

Manufacturing

External Manufacturing

• Burn in Test
• Temp / Thermal Testing
• Environmental Testing
• Safety Testing
• Software Compatibility Test
• Vendor Selection and Component Procurement
• Product Traceability
• Obsolescence, End of Life and Last Time Procurement Management
• Simple to use on-line RMA System
• Traceability of Shipments
• Product Labelling
• OEM/Branded Packaging
• System Branding
• Custom Labels
• Surface Mount: – High Speed Placement
• Conventional Through Hole Insertion & Assembly
• Automated Optical Inspection
• Bespoke PCB Test

 

Click here to find out more.