Home » Shop » Industrial Computers | Embedded Systems | Boards & Modules » Industrial Motherboards and Embedded SBCs » 2.5" Pico-ITX Single Board Computers » DFI FS053 NXP i.MX6 2.5″ Fanless Pico-ITX SBC
FS053
FS053B060731 RA w600
FS053F060731 RA w600
FS053Side060731 RA w600

DFI FS053 NXP i.MX6 2.5″ Fanless Pico-ITX SBC

  • Product Name: DFI FS053
  • Motherboard Form Factor: 2.5″ Pico-ITX
  • CPU: NXP i.MX6 Processor
  • RAM: DDR3L SDRAM memory down, up to 4GB
  • Expansion: 1 Mini PCIe, 1 SD
  • Other features: Dual independent displays: HDMI + LVDS, Rich I/O: 2 GbE, 2 COM, 4 USB 2.0, 15-Year CPU Life Cycle Support Until Q4′ 32 (Based on NXP Roadmap)
ADD TO QUOTE
SKU: FS053 Category: Tags: , , , , , , , , , Brand:

Description

  • NXP i.MX6 Processor 2.5″ Pico-ITX
  • Expansion: 1 Mini PCIe, 1 SD
  • DDR3L SDRAM memory down , up to 4GB.
  • Dual independent displays: HDMI + LVDS
  • Rich I/O: 2 GbE, 2 COM, 4 USB 2.0
  • 15-Year CPU Life Cycle Support Until Q4′ 32 (Based on NXP Roadmap)

Specification

System
Processor
NXP i.MX6 Cortex-A9 Dual Lite, 1.0 GHz
NXP i.MX6 Cortex-A9 Quad, 1.0 GHz
Memory
1GB/2GB SDRAM Memory Down (default), 4GB (available upon request)
Single Channel DDR3L 1600MHz/1866MHz
BIOS
4MB NOR Flash

Graphics
Display
1 x HDMI
1 x LVDS
HDMI: resolution up to 1920×1080 @ 60 Hz
LVDS: single channel, resolution up to 1366×768 @ 60Hz
Single/Dual Displays
Yocto: HDMI or LVDS (Default)
Android: HDMI + LVDS (available upon request)

Expansion
Interface
1 x Full-size Mini PCIe (PCIe/USB)
Ethernet
Controller
1 x ATHEROS AR8033 Ethernet (10/100/1000Mbps)
1 x LAN7500 Ethernet (10/100/1000Mbps)

Rear I/O
Ethernet
2 x GbE (RJ-45)
Serial
1 x RS-485 (2-wire)
USB
2 x USB 2.0
1 x USB 2.0 OTG Port
Display
1 x HDMI
I/O
eMMC
Supports 8GB, 16GB and 32GB eMMC onboard

Internal I/O
Serial
1 x RS-232/422/485 (8-wire)
USB
1 x USB 2.0
Display
1 x LVDS LCD Panel Connector
SATA
1 x SATA 2.0 (up to 3Gb/s) (Quad processor only)
DIO
1 x 8-bit DIO
SD
1 x Micro SD Slot

Watchdog Timer
Output & Interval
System Reset, Programmable via Software from 1 to 255 Seconds
Power
Type
9~36V DC
Connector
Terminal block (2-pin)
Consumption
Typical: 12V @ 0.355A (4.26Watt)
Max.: 12V @ 0.631A (7.58Watt)

OS Support
OS Support
Yocto (1.8, Default Preloaded on eMMC)
Android (5.1.1)

Environment
Temperature
Operating: -20 to 70°C/0 to 60°C Storage: -40 to 85°C
Humidity
Operating: 5 to 95% RH Storage: 5 to 95% RH
MTBF
486,335 hrs @ 25°C; 342,613 hrs @ 45°C ; 237,430 hrs @ 60°C

Mechanism
Dimensions
2.5″ Pico-ITX Form Factor 100mm (3.94″) x 72mm (2.83″)
Height
PCB: 1.6mm Top Side: 16.15mm, Bottom Side: 4mm

Standards and Certifications
Certifications
CE, FCC, RoHS

Packing List
Packing List
1 FS053 board
1 terminal block for RS485 342-361021-000
1 Heat spreader (Height: 11mm) A71-808303-000G
Note: Please choose “FS053 product page > Download button” to download the Driver.

Country of Origin
Country of Origin
Taiwan

 

Ordering Information

  • FS053-EC-28QD – Fanless, i.MX6 Quad Lite 1.0GHz, 2GB DDR3L SDRAM, 8GB eMMC, 2 LAN, 2 COM, 4 USB, 9~36V DC in terminal block, -20 to 70°C
  • FS053-EC-18DL – Fanless, i.MX6 Dual Lite 1.0GHz, 1GB DDR3L SDRAM, 8GB eMMC, 2 LAN, 2 COM, 4 USB, 9~36V DC in terminal block, -20 to 70°C
  • FS053-BC-28QD – Fanless, i.MX6 Quad 1.0GHz, 2GB DDR3L SDRAM, 8GB eMMC, 2 LAN, 2 COM, 4 USB, 9~36V DC in terminal block, 0 to 60°C
  • FS053-BC-18DL – Fanless, i.MX6 Dual Lite 1.0GHz, 1GB DDR3L SDRAM, 8GB Emmc, 2 LAN, 2 COM, 4 USB, 9~36V DC in terminal block, 0 to 60°C

 

DFI Low Power Pico-ITX SBCs

BVM Customisation Service

Design | Develop | Test | Manufacture

If you cant find an off the shelf product that meets your specific requirements speak with our in house design team who can customize an existing product or design a new product from start to finish. With extensive industrial and embedded computing experience, we deliver reliable, high-performance solutions tailored to your requirements.

 

Here’s a selection of our design, manufacturing & associated services: –

Design to Order Banner

Design to Order: OEM/ODM Embedded Product Design Services

For customers designing a new product or working with an existing prototype.

Build to Order Banner

Build to Order: Computer Design and Customisation Services​

Take an existing system and we can:

Build to Order: Racks and Towers, Peli Case PCs and Mini-ITX PCs

Embedded Software Banner

Embedded Software: Configuration, Integration and Deployment

Porting, Integration & Deployment

 

ALL OUR DESIGN AND MANUFACTURING SERVICES INCLUDE:

Testing

Testing
Lifecycle

Materials Management
Logistics

Logistics and Tracking
Manufacturing

External Manufacturing
• Burn in Test
• Temp / Thermal Testing
• Environmental Testing
• Safety Testing
• Software Compatibility Test		 • Vendor Selection and Component Procurement
• Product Traceability
• Obsolescence, End of Life and Last Time Procurement Management
• Simple to use on-line RMA System		 • Traceability of Shipments
• Product Labelling
• OEM/Branded Packaging
• System Branding
• Custom Labels		 • Surface Mount: – High Speed Placement
• Conventional Through Hole Insertion & Assembly
• Automated Optical Inspection
• Bespoke PCB Test

 

Click here to find out more.

Related Products