ASRock Industrial SBC-220 N3160 3.5″ SBC
- Product Name: Asrock SBC-220
- Motherboard Form Factor: 3.5″ SBC
- CPU: Intel Pentium/Celeron Braswell SoC Processor
- RAM: Supports Single Channel DDR3L 1333/1600MHz, 1 x SO-DIMM, up to 8GB system memory
- Expansion: 1 x mini-PCIe, 1 x mSATA
- Other features: Integrated Intel Gen8 Intel Graphics DX 11, OGL3.2, 1 x HDMI, 1 x D-Sub, 1 x Dual Channel 24-bit LVDS/eDP, 4 xUSB 3.0, 2 x USB 2.0, 1 x SATA3, Gigabit LAN: 2 x Intel Lan, 1 x TPM Header, 12~24 V DC-in
Share this:
- Click to share on LinkedIn (Opens in new window) LinkedIn
- Click to share on Facebook (Opens in new window) Facebook
- Click to share on X (Opens in new window) X
- Click to share on Reddit (Opens in new window) Reddit
- Click to share on WhatsApp (Opens in new window) WhatsApp
- Click to print (Opens in new window) Print
Description
Features
- Intel Pentium/Celeron Braswell SoC Processor (Apollo Lake here)
- Integrated Intel Gen8 Intel Graphics DX 11, OGL3.2
- Supports Single Channel DDR3L 1333/1600MHz, 1 x SO-DIMM, up to 8GB system memory
- 1 x HDMI, 1 x D-Sub, 1 x Dual Channel 24-bit LVDS/eDP
- 4 xUSB 3.0, 2 x USB 2.0, 1 x SATA3
- 1 x mini-PCIe, 1 x mSATA
- Gigabit LAN : 2 x Intel Lan
- 1 x TPM Header
- 12~24 V DC-in
Specifications
| Form Factor | |
| Dimensions | – 3.5″ SBC (5.8-in x 4.0-in) / ( 146 x 102 mm) |
| Processor System | |
| CPU | – Intel Pentium/Celeron Braswell SoC – Supports Hyper-Threading Technology – Default N3160 Quad core 6W processor |
| Core Number | – (By CPU, Max 4) |
| Max Speed | – (By CPU) |
| L3 Cache | – (By CPU) |
| Chipset | – (By CPU) |
| BIOS | – UEFI |
| Expansion Slot | |
| PCI | – 0 |
| Mini-PCIe | – 1x Full/half size mini-PCIe slot |
| mSATA | – 1 |
| PCIe | – 0 |
| CFast Card Socket | – 0 |
| Memory | |
| Technology | – Single Channel DDR3L 1333/1600 MHz SDRAM |
| Max. | – 8GB |
| Socket | – 1 x SO-DIMM |
| Graphics | |
| Controller | – Intel Gen8 Intel Graphics DX 11, OGL3.2 |
| VRAM | – Shared Memory |
| VGA | – Supports max. resolution 1920×1200 |
| LVDS | – Dual channel 24-bit co-lay with eDP, max resolution 1920×1200@60Hz |
| HDMI | – Supports HDMI, max resolution 1920×1200 |
| DVI | – No |
| DisplayPort | – No |
| MultiDisplay | – Yes (Triple Display) |
| Ethernet | |
| Ethernet | – 10/100/1000 Mbps |
| Controller | – 2 x Intel i210 |
| Connector | – 2 x RJ-45 |
| Storage | |
| Max Data Transfer Rate | – SATA3 (6.0Gb/s) |
| Rear I/O | |
| VGA | – 1 |
| DVI | – 0 |
| HDMI | – 1 |
| DisplayPort | – 0 |
| Ethernet | – 2 |
| USB | – 4 (USB 3.0) |
| Audio | – 2 (Mic-in, Line-out) |
| Serial | – 0 |
| eSATA | – 0 |
| PS2 | – 0 |
| Internal Connector | |
| USB | – 4 ( 2 x 2.54 pitch header USB 2.0 compliant) |
| LVDS / inverter | – 1/1 |
| VGA | – 0 |
| Serial | – 4 x 2.0 pitch header RS-232 (COM1 support RS-232/RS-422/485) |
| SATA | – 1 x SATA3 (6.0Gb/s) |
| mPCIe | – 1 |
| Parallel | – 0 (Co-lay with 4in/4out DIO) |
| mSATA | – 1 |
| IrDA | – 0 |
| GPIO 8-bit | – 4 x GPI + 4 x GPO |
| SATA PWR Output Con | – 1 |
| Speaker Header | – 1 |
| Watchdog Timer | |
| Output | – From Super I/O to drag RESETCON# |
| Interval | – 256 segments, 0,1,2…255sec/min |
| Power Requirements | |
| Input PWR | – 12 / 19~24 VDC |
| Power On | AT/ATX Supported – AT : Directly PWR on as Power input ready – ATX: Press Button to PWR on after Power input ready |
| Environment | |
| Temperature | – 0ºC – 60ºC |
The specification is subject to change without notice in advance. The brand and product names are trademarks of their respective companies. Any configuration other than original product specification is not guaranteed.
BVM Customisation Service
Design | Develop | Test | Manufacture
If you cant find an off the shelf product that meets your specific requirements speak with our in house design team who can customize an existing product or design a new product from start to finish. With extensive industrial and embedded computing experience, we deliver reliable, high-performance solutions tailored to your requirements.
Here’s a selection of our design, manufacturing & associated services: –
Design to Order: OEM/ODM Embedded Product Design ServicesFor customers designing a new product or working with an existing prototype.
|
Build to Order: Computer Design and Customisation ServicesTake an existing system and we can:
Build to Order: Racks and Towers, Peli Case PCs and Mini-ITX PCs Embedded Software: Configuration, Integration and DeploymentPorting, Integration & Deployment
|
ALL OUR DESIGN AND MANUFACTURING SERVICES INCLUDE:
![]() Testing |
![]() Materials Management |
![]() Logistics and Tracking |
![]() External Manufacturing |
| • Burn in Test • Temp / Thermal Testing • Environmental Testing • Safety Testing • Software Compatibility Test |
• Vendor Selection and Component Procurement • Product Traceability • Obsolescence, End of Life and Last Time Procurement Management • Simple to use on-line RMA System |
• Traceability of Shipments • Product Labelling • OEM/Branded Packaging • System Branding • Custom Labels |
• Surface Mount: – High Speed Placement • Conventional Through Hole Insertion & Assembly • Automated Optical Inspection • Bespoke PCB Test |
Click here to find out more.












