Asrock Intel Celeron J1900 Mini-ITX Motherboard IMB-1001D

Compare

Asrock – IMB-1001D – Mini-ITX Motherboard IMB-1001D – Quad Core – 2.0Ghz – 1333Mhz DDR3 – PCIe Mini PCIe M.2 SATA – LVDS VGA HDMI

SKU: IMB-1001D Categories: , Tags: ,

Description

  • Intel® Celeron® Processor J1900
  • Supports Single Channel DDR3L SO-DIMM 1333, up to 8GB
  • 1 x Dual Channel 24-bit LVDS, 1 x VGA, 1 x HDMI
  • 1 xUSB 3.1, 8 x USB 2.0, 2 x SATA2, 6 x COM
  • 1 x PCIe x1, 1 x mini-PCIe, 1 x M.2 Key M
  • 2 x Realtek LAN
  • 12V DC-in (DC Jack / 4-pin DC-in PWR Con)

 

Specification

Form Factor
Dimensions
– Mini-ITX (6.7-in x 6.7-in)
Processor System
CPU
– Intel® Celeron® Processor J1900, QC, 2.00GHz, 10W
Chipset
– SoC
Expansion Slot
PCIe
– 1 x PCIe x1
Mini-PCIe
– 1 x Full/Half size with PCIe x1 and USB 2.0
M.2
– 1 x M.2 (Key M, 2242/2260/2280) with shared SATA2 for SSD
Memory
Technology
– Single Channel DDR3L 1333 MHz
Max.
– 8GB
Socket
– 1 x SO-DIMM
Graphics
Controller
– Integrated Intel® Gen7 Intel® Graphics DX 11, OGL3.2
VGA
– Supports max resolution up to 1920 x 1200@60Hz
DVI
– N/A
LVDS
– Dual Channel 24-bit, max resolution up to 1920 x 1200@60Hz
HDMI
– Supports max resolution up to 1920 x 1200
DisplayPort
– N/A
MultiDisplay
– Dual Display
Ethernet
Ethernet
– 10/100/1000 Mbps
Controller
– 2 x Realtek RTL8111G
Storage
SATA
– 2 x SATA2, one is shared with M.2 Key M
Rear I/O
VGA
-1
DVI
– N/A
HDMI
-1
DisplayPort
– N/A
Ethernet
-2
USB
– 3 x USB 2.0, 1 x USB3.1
Audio
– 2 (Mic-in. Line-out)
Serial
– N/A
PS2
– N/A
Internal Connector
USB
– 5 x USB 2.0 (2x header, 1x TypeA)
LVDS / inverter
-1
eDP
– N/A
VGA
-1
Serial
– 5 x COM (RS-232), 1 x COM (RS-232/422/485)
SATA
– 2 x SATA2, one is shared with M.2 Key M
Parallel
– 1 (shared with GPIO)
GPIO
– 8 x GPI, 8 x GPO
SATA PWR Output
-1
Speaker Header
-1
TPM
– 1 x Header
Watchdog Timer
Output
– From Super I/O to drag RESETCON#
Interval
– 256 segments, 0,1,2…255sec/min
Power Requirements
Input PWR
– 12V DC-in (DC Jack / 4-pin DC-in PWR Con)
Power On
AT/ATX Supported
– AT : Directly PWR on as power input ready
– ATX : Press button to PWR on after power input ready
Environment
Temperature
– 0ºC – 60ºC
Storage Temp
– -40ºC – 85° C
Operating Humidity
– 5% ~ 90%
Storage Humidity
– 5% ~ 90%

Datasheet

Download