Asrock IMB-150 Mini-ITX Celeron J1900/N2930 Motherboard – Baytrail

Asrock – IMB-150 – Mini-ITX Celeron J1900/N2930 Motherboard – Baytrail , Motherboard , Mini-ITX Industrial Motherboards , Baytrail

SKU: IMB-150 Category: Tags: , , ,


The latest high performance Mini-ITX motherboard from Asrock is the IMB-150. Benefitting from the entry level H81 chipset, the board is a cost-effective, high performance platform suitable for many embedded applications. It supports Haswell 4th Generation Intel Core i7/i5/i3/Celeron processors in the LGA1150 socket with up to 16GB of dual-channel DDR3 1600MHz system memory. The IMB-185 combines heavyweight processing capability with low power consumption. Standard processor options range from 3.5GHz i3 with a TDP of 54W to a low power 3.9GHz i7 with a TDP of 45W; other variants are also available. Typical applications include video signage, gaming, automation, security video processing and many other uses where graphics-heavy and/or processing-intensive computing is required.

Intel HD graphics support VGA up to 1920 x 1200, HDMI 1.4a up to 4096 x 2304 and 24-bit dual channel LVDS; dual displays are supported. Two SATA3 6.0Gb/s and two SATA2 3.0Gb/s mass storage interfaces, two Gigabit Ethernet ports, two USB3.0 and eight USB2.0 ports, a mSATA and a PCIe x16 slot are provided. Three RS232 and three RS232/422/485 serial ports, a TPM header and audio I/O are available. Input power is from an external source with both AT and ATX modes supported.



  • Intel Baytrail SoC Processor
    – IMB-150D (J1900)
    – IMB-150N (N2930)
  • Integrated Intel® Gen7 Intel® Graphics DX 11*, OGL3.2
  • Supports Dual Channel DDR3L SO-DIMM 1333,up to 8GB
  • 1 x HDMI, 1 x VGA, 1 x LVDS
  • 4 x USB 3.0, 6 x USB 2.0, 2 x SATA2
  • 1 x Mini-PCIe, 1 x PCIe x1, 1 x mSATA
  • 2 x Realtek LAN
  • 1 x TPM Header
  • 9-19V DC-In (4-pin ATX PWR Con)


 Form Factor
Dimensions – Mini-ITX (6.7-in x 6.7-in)
 Processor System
CPU – Intel new Atom Baytrail-M/D
– Supports Hyper-Threading Technology
Core Number – 4
Max Speed – (By CPU)
L3 Cache – 2MB
Chipset – N/A
 Expansion Slot
PCI – 0
Mini-PCIe – 1 (Full Size)
mSATA – 1
PCIe – 1
CFast Card Socket – 0
Technology – Dual Channel DDR3 1333 MHz SDRAM
Max. – 16GB
Socket – 2 x SO-DIMM
Controller – Intel Gen7 Intel Graphics DX 11*, OGL3.2
VRAM – Shared Memory
VGA – Supports max. resolution 1920×1200
LVDS – Dual Channel 24-bit, max resolution 1920×1200@60Hz
HDMI – Supports HDMI 1.3a, max resolution 1920×1200
DVI – No
DisplayPort – No
MultiDisplay – Yes (Dual Display)
Ethernet – 10/100/1000 Mbps
Controller – GbE LAN: 2 x Realtek RTL8111E-VL
Connector – 2 x RJ-45
Max Data Transfer Rate – SATA2 (3.0Gb/s)
 Rear I/O
VGA – 1
DVI – 0
HDMI – 1
DisplayPort – 0
Ethernet – 2
USB – 4 (2 x USB 3.0 compliant, 2 x USB 2.0 compliant)
Audio – 2 (Mic-in, Line-out)
Serial – 1 (RS-232/422/485) + 2 (RS232)
eSATA – 0
PS2 – 2 (1 x keyboard, 1 x mouse)
 Internal Connector
USB – 6 (2 x USB 3.0 compliant, 4 x USB 2.0 compliant)
LVDS / inverter – 1/1
VGA – 1 (shared with rear I/O VGA COM)
Serial – 3 (RS-232)
SATA – 2 x SATA3 (6.0Gb/s)
mPCIe – 1
Parallel – 1
mSATA – 1 (shared)
IrDA – 0
GPIO 8-bit – 4 x GPI + 4 x GPO
SATA PWR Output Con – 1
Speaker Header – 1
 Watchdog Timer
Output – From Super I/O to drag RESETCON#
Interval – 256 segments, 0,1,2…255sec/min
 Power Requirements
Input PWR – 9-19V DC-In (4-pin ATX PWR Con)
Power On AT/ATX Supported
– AT : Directly PWR on as Power input ready
– ATX: Press Button to PWR on after Power input ready
Temperature – 0ºC – 60ºC

The specification is subject to change without notice in advance. The brand and product names are trademarks of their respective companies. Any configuration other than original product specification is not guaranteed.



If you cant find an off the shelf product that meets your specific requirements speak with our in house design team who can design a new product from start to finish.


Design | Develop | Test | Manufacture

Here’s a selection of our design, manufacturing

& associated services: –


Design to Order: OEM/ODM Embedded Product Design Services

For customers designing a brand-new product from scratch or working with an existing prototype.DesignToOrder

Build to Order: Embedded Computer Design and Customisation Services​

Take an existing system and we can:BuildToOrder

  • Custom specification (CPU, Ram, I/O, Storage)
  • Chassis customisation and branding
  • Custom BIOS
  • Software – Custom OS Image
  • Custom Packaging and branding
  • Integrating newly designed or existing hardware into a larger system

Build to order Racks and Towers, Peli Case PCs and Mini-ITX PCs

Embedded Software Services : Configuration, Integration and Deployment

Porting, Integration & DeploymentEmbeddedSoftware

  • Windows image capture from customers HDD
  • Linux image capture from customers HDD
  • Windows / Linux Deployment from customers image
  • Custom Windows images, create and deploy
  • Update management
  • Custom Linux and Android images?
  • Custom BIOS